EasyManuals Logo
Home>Roland>Musical Instrument>RD-700NX

Roland RD-700NX User Manual

Roland RD-700NX
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
33
Performance
Adding Reverberation to the Sound (REVERB)
The RD-700NX can apply a reverb e ect to the notes you play on the keyboard.
Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if you were playing in a concert hall.
12
1. Press the [REVERB] button.
The reverb type switches each time you press the [REVERB] button.
MEMO
Types of reverb other than those listed can be selected in “Reverb Type”
(p. 74) of the “3. E ects” Edit screen. In this case, the [REVERB] button’s
indicator corresponding to the selected type  ashes.
2. Adjust the REVERB [DEPTH] knob to adjust the amount of reverb e ect to be applied.
Rotating the knob clockwise applies a deeper reverb, and rotating it counterclockwise applies less reverb.
NOTE
When the Layer EDIT’s “Reverb Amount” setting is set to “0, then no e ect is applied, even when the REVERB [DEPTH] knob is turned (p. 56).
Adding Breadth to the Sound (CHORUS/DELAY)
You can apply a chorus and delay e ect to the notes you play on the keyboard.
By adding the chorus and delay e ect, you can give the sound greater dimension, with more fatness and breadth.
12
1. Press the [CHORUS/DELAY] button.
The chorus type switches each time you press the [CHORUS/DELAY] button.
MEMO
Types of chorus other than those listed can be selected in “Chorus Type”
(p. 75) of the “3. E ects” Edit screen. In this case, the [CHORUS/DELAY]
buttons indicator corresponding to the selected type  ashes.
2. Adjust the CHORUS/DELAY [DEPTH] knob to select the amount of chorus e ect to be applied.
Rotating the knob clockwise applies a deeper chorus, and rotating it counterclockwise applies less chorus.
NOTE
When the Layer EDIT’s “Chorus Amount” setting is set to “0, then no e ect is applied, even when the CHORUS/DELAY [DEPTH] knob is turned (p. 56).
TYPE Explanation
OFF (unlit) No reverb is used.
ROOM Simulates the reverberation of a room.
HALL Simulates the reverberation of a large concert hall.
CATHEDRAL Simulates the reverberation of a cathedral.
TYPE Explanation
OFF (unlit) Chorus and Delay is not used.
CHORUS
You can give the sound greater dimension, with
more fatness and breadth.
DELAY
This e ect delays the sound to produce an
echo-like e ect.

Table of Contents

Other manuals for Roland RD-700NX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland RD-700NX and is the answer not in the manual?

Roland RD-700NX Specifications

Power IconPower
power consumption12 W
Audio and Sound IconAudio and Sound
maximum polyphony128 voices
sound generatorSuperNATURAL Piano, SuperNATURAL (E.Piano), Virtual Tone Wheel Organ, PCM Sound Generator, GM2 (for SMF Playback)
effectsMulti-Effects (2 x 4 systems, 84 types), Reverb (6 types), Chorus (3 types), 3-band Compressor, 4-band Digital Equalizer
Connectivity IconConnectivity
output jacksL/MONO, R Jacks (1/4-inch phone type), BALANCED OUT (L, R) Jacks (XLR type)
pedal jacksDAMPER Pedal Jack, Control Pedal Jacks (FC1, FC2)
midi connectorsIN, OUT1, OUT2, THRU/OUT3
Weight and Dimensions IconWeight and Dimensions
width1, 444 mm (56-7/8 inches)
depth375 mm (14-13/16 inches)
height148 mm (5-7/8 inches)
weight25.0 kg (55 lbs 2 oz)

Related product manuals