41
Using the Convenient Functions in Performances
Applying E ects to the Sound (MFX)
In addition to chorus (p. 33) and reverb (p. 33), the RD-700NX also allows you to apply “multi-e ects” to sounds. Multi-e ects provides a collection of 84
di erent e ects, such as distortion and rotary, from which you can choose.
You can simultaneously use two multi-e ects for each layer; they are referred to as MFX 1 and MFX 2.
The factory settings have a suitable e ect assigned to each of the tones.
1. Access the Live Set screen (p. 27).
2. Press the [TONE EDIT] button.
The [TONE EDIT] button will light, and the TONE EDIT screen will appear.
3. Use the cursor [ ] [ ] buttons to choose MFX 1 or MFX 2.
4. Use the cursor [
] [ ] buttons to move the cursor to the parameter that you want to edit.
5. Use the [DEC] [INC] buttons or the VALUE dial to set the desired value.
6. When you’ve nished editing, press the [TONE EDIT] button so its indicator goes out.
You will return to the Live Set screen.
NOTE
E ects are not applied to Tones for which the TONE EDIT MFX 1/MFX 2 settings are set to “0 THRU” (p. 54).
MEMO
You can switch the multi-e ect on/o and adjust its depth for the tone of the currently selected layer. By switching layers, you can adjust the tone
settings for each layer (p. 30).
To Next Page
Loading...
Need help?
Power
Audio and Sound
Weight and Dimensions
