4) Control the auxiliary side blower.
5) Set the retainers.
6) Set the skid rollers.
7) Change the flat spring.
Chapter 3 Printing Practice
Control the auxiliary side blower volume to separate the top 5 to 6 sheets
of
paper.
Use the retainers for thin paper.
If
the skid rollers are positioned too forward, the sheet
of
paper will bulge
as shown in the illustration on the left. Do not set the skid rollers like
this.
Change the flat spring on the paper feed drum side with the one for thin
paper.
Operation Edition -
71
To Next Page
Loading...
