1-4 Cylinder Packing
and
Plate
and
Blanket Size
1)
Plate packing
and
plate size
(Leading edge)
1 220 mm (8.66") 1
I t I
I
~-----i------~.T22mm(0.87")
11
mm (0.43") Printing start line
Max. printing area
485mm
330 x
438
mm
(19.09") (12.99
X 17.24")
1~
1-335
mm
(13.19")-l
Chapter 1 Press Outline
Plate packing (standard)
0.15 mm (0.006")
(Reference) The 0.15
mm
(0.006") plate thickness is the standard thickness. However, the pressure between the
plate cylinder and blanket cylinder can be adjusted by the plate pressure adjustment scale. So, a plate
with a thickness from 0.1
mm
(0.004") to 0.3
mm
(0.012") can be used.
<Metal plate, polyester plate,
or
paper
master>
(Leading edge)
1 220 mm (8.66") 1
I t I
I
r-'1-----l----- -u--
_T22
mm
(0.87")
11
mm (0.43") Printing start line
Max. printing area
485±
1 mm
(19.09 ± 0.04")
330x
438
mm
(12.99
X 17.24")
1!--------!
1-335
mm
(13.19")-J
Plate packing (standard)
0.15 mm (0.006")
(Reference) A metal plate with a 0.15
mm
(0.006") plate thickness and a polyester plate with a 0.2
mm
(0.008")
plate thickness can
be
used. Please adjust the pressure between the plate cylinder and blanket cylin-
der
by
the plate pressure adjustment scale.
Introduction Edition - 7
To Next Page
Loading...
Need help?
General
