Samsung HW-C900 User Manual

HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung 1V's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG 1V using an
HDMI Cable. This is only available with SAMSUNG 1Vs and SAMSUNG AV Products that support
Anynet+.
1. Connect the AV receiver to a Samsung 1V with an HDMI cable. (see page 22)
2. Set the Anynet + function on your 1V.
(See the 1V instructions manual for more information.)
• You can operate the volume on the AV receiver by using Volume buttons on the 1V remote
control.
To turn on Anynet+
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the" T buttons to select HOMI SETUP, and then press the ENTER or ~ button.
4. Press the" T buttons to select HOMI ANYNET +, and then press the ENTER or ~ button.
5. Press the" T buttons to set ANYNET + to ON.
- To exit setup mode-
• Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
~ • If you use an HOMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using
the lV's remote control. This function is available only in connection with Samsung TV and DVD player
supporting Anynet +(HOMI-CEC).
• Please check your TV for the ~net+ logo. If your TV has an ~ynet+ logo, then it supports the Anynet+
function.
• When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).
Otherwise, it can cause a malfunction.
23
I
.-
-0
o
z
z
m
o
~
o
~

Samsung HW-C900 Specifications

General

Brand	Samsung
Model	HW-C900
Category	Receiver
Language	English