Samsung HW-C900 User Manual

>
Symptom Check
Remedy
.
Can't select Dolby Pro • Is the input signal selected properly? • Only 2 channel signal can select
Logic IIx mode.
Dolby Pro Logic IIx mode. (ex:Dolby
Digital, PCM, 2 channel analog input
signaL)
Can't select NEO:6 mode. • Is the input signal selected properly? • Use PCM and Analog input signal.
There is no sound when
• Is Digital input selected?
• Check whether the DVD player is
playing a DTS encoded
properly connected and refer to
DVD.
page 36 to select the digital input.
Product protection function
Heat protection
• The protection function will come on if the main unit or power transformer overheats.
T .I C f'; " will appear in the display .
This function will come on :
-
If speaker terminal is shorted
- If speaker cable is shorted
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the
display and the unit will work properly.
rB III If PROTECTION appears on the display, check whether the speaker terminal is shorted and then turn on
the unit again.
ASC Error Ust
Error No. VFDMessage
Action
E01
HPCONCT Disconnect the headphones.
E02 NOMIC
Connect the microphone.
E03 NOISY
Take an appropriate action to reduce the surrounding noise.
E04
MIC LEVL
The speaker is too close to the microphone.
Check the distance between speaker and microphone.
EOS
NO FRONT
Check if the front speaker is connected properly.
EO? LEVL OVR
Check the position of each of speaker and microphone.
E08
DIST OVR
The distance between speaker and microphone exceeds the acceptable value.
Check the location of microphone and each speaker.
E13 TIME OVR
Unplug the power cable and plug it back.
Then, perform ASC again.
E14
CODE ERR
Unplug the power cable and plug it back.
Then, perform ASC again.
66

Samsung HW-C900 Specifications

General

Brand	Samsung
Model	HW-C900
Category	Receiver
Language	English