Samsung HW-C900 User Manual

Setllp ~
SETTING THE SPEAKER LEVEL
You can set the balance and level of speakers.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the A T buttons to select SPK LEVEL, and then press the ENTER
or ~ button.
4. Press the A T buttons to select the speaker you want, and then press the
ENTER or ~ button.
• Each time you press this button, F.L ~ F.R~ CEN ~ S.L ~ S.R ~ SBL
~ SBR ~ S.w will be selected in turn.
5. Press the A T buttons to set the Speaker Level mode.
• You can adjust it from -10 to +1 OdB in 1 step increments.
• The sound gets quieter at -1 OdB and louder at +1 OdB.
- To exit setup mode -
• Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
CCTIID
_IL! Ul
LEVEL
- Setting Speaker Level -
• F.L (front left): -10 - +1 OdB
• F.R (front right): -10 - +1 OdB
• S. L (surround left): -10 - +1 OdB
• S. R (surround right): -10 - +1 OdB
• CEN (center): -10 - +1 OdB
• SW (subwoofer): -10 - +1 OdB
• SBL (surround back left): -10 - +1 OdB
• SBR (surround back right): -10 - +1 OdB
• FHL (front height left): -10 - +1 OdB
• FHR (front height right): -10 - +1 OdB
~ • If Dolby Pro Logic liz is set to On, the Surround Back speaker (SBUSBR) is changed to the Front Height
Speaker (FHUFHR).
44

Samsung HW-C900 Specifications

General

Brand	Samsung
Model	HW-C900
Category	Receiver
Language	English