106
Security
MENU mSystemSecurityENTER E
Security
Safety Lock On
USB Auto Play Lock
Mobile Connection Lock
Remote Management
Power On Button
On
On
Off
The displayed image may differ depending on the model.
Safety Lock On
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be locked
by the Safety Lock On function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0-0-0-0).
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while Safety Lock On is enabled.
Off / On
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
Off
Play MagicInfo content saved on the USB device automatically.
On
Do not play MagicInfo content saved on the USB device automatically.
Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
Mobile Connection Lock
Restrict other devices on your network, such as smart phones and tablets, to share content with your signage.
Off / On
Remote Management
You can Allow or Deny external commands to access your device via a network.
The changed setting remains even after the product is turned off and on using the Panel key.
To Next Page
Loading...
Need help?
General