English - 33
Setting Up Anynet
+
Press the TOOLS button to display the Tools menu. You can also display Anynet
+
menu by selecting Tools Anynet
+
(HDMI-CEC).
Setup
Anynet
+
(HDMI-CEC) Off / On
To use the Anynet
+
Function,
Anynet
+
(HDMI-CEC) must be set to On.
When the Anynet
+
(HDMI-CEC) function is disabled, all the Anynet
+
related operations
are deactivated.
Auto Turn Off No / Yes
Setting an Anynet
+
Device to turn Of
f Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet
+
function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned of
f. If an external device is still recording, it may or may not turn off.
Switching between Anynet
+
Devices
1. Press the TOOLS button. Press the ENTER
E
button to select Anynet
+
(HDMI-CEC).
2. Press the or button to select Device List, then press the ENTER
E
button.
Anynet
+
devices connected to the TV are listed.
If you cannot nd a device you want, press the red button to scan for devices.
3. Press the or button to select a particular device and press the ENTER
E
button. It
is switched to the selected device.
Only when you set Anynet
+
(HDMI-CEC) to On in the Application menu, the Device
List menu appears.
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet
+
function. Make sure to
switch to an
Anynet
+
device by using the Device List.
¦
T
R
N
N
N
¦
N
N
N
N
N
N
N
N
Anynet
+
(HDMI-CEC)
Media play (USB)
Application
Anynet
+
(HDMI-CEC) : On
Auto Turn Off : Yes
U
Move
E
Enter
R
Return
Device List
Setup
U
Move
E
Enter
R
Return
View TV
Device List
Record : DVDR
DVDR Menu
DVDR Operation
Setup
U
Move
E
Enter
R
Return
To Next Page
Loading...
Need help?
General
Weight and Dimensions
