English - 34
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu Description
View TV Anynet
+
mode changes to
TV broadcast mode.
Device List Shows the Anynet
+
device list.
(device_name) Menu
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear
.
(device_name) Operation
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
menu of the DVD recorder will appear
.
Record: (*recorder)
Starts recording immediately using the recorder
. (This is only available for devices that support
the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device, when the menu
of the corresponding device is displayed on the
screen.
Numeric buttons ////ENTER
E
buttons
Color buttons / EXIT button
After switching to the device, while playing a le
(Backward search) /
(Forward search) /
(Stop) /
(Play) /
(Pause)
Device with built-in
Tuner
After switching to the device, when you are
watching a TV program
z
button
Audio Device When Receiver is activated
y
/ MUTE button
The Anynet
+
function only works when the active source on the TV remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet
+
devices using the buttons on the TV. You can control Anynet
+
devices only using the TV remote
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet
+
device.
The Anynet
+
functions do not operate with other manufacturers’ products.
The
,
operations may differ depending on the device.
Recording
You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER
E
button to select Anynet
+
(HDMI-CEC).
2. Press the or button to select Recording Immediately and press the ENTER
E
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the or button to select a recording device and press the ENTER
E
button. Recording begins.
When the recording device is not displayed
Select Device List and press the red button to search devices
3. Press the EXIT button to exit.
Y
ou can record the source streams by selecting Record: (device_name).
Pressing the
button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device’s users manual.
N
N
N
N
N
N
N
¦
N
N
N
N
N
Viwe TV
Device List
Record : DVDR
DVDR Menu
DVDR Operation
Setup
U
Move
E
Enter
R
Return
To Next Page
Loading...
Need help?
General
Weight and Dimensions
