English - 5
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product color and shape may vary depending on the model.
N
N
N
1
POWER: Turns the TV on and
off.
2
TV: Selects the TV mode directly
3
NUMERIC BUTTONS: Press to
change the channel.
4
_: Press to select additional
channels (digital) being
broadcast by the same station.
For example, to select channel
‘54-3’, press ‘54’, then press _
and ‘3’.
5
MUTE
M
: Press to temporarily
cut off the sound.
6
y
: Press to increase or
decrease the volume.
7
CH LIST: Used to display
Channel Lists on the screen.
8
TOOLS: Use to quickly select
frequently used functions.
9
INFO: Press to display
information on the TV screen.
0
COLOR BUTTONS: Use these
buttons in the Channel list menus
etc.
!
MEDIA.P: Allows you to play
music les, pictures, and movies.
@
P. MO DE : Press to select the
picture mode.
#
Use these buttons in the DMA
and Anynet
+
modes. (
: This
remote can be used to control
recording on Samsung recorders
with the Anynet
+
feature)
$
ON/OFF
@
: Pressing the
ON/OFF
@
light button toggles
between on and off. When the
remote control is on, and a
button is pressed on the remote
control, the remote control
buttons will be lit for a moment.
(Using the remote control with
the ON/OFF
@
light button
set to On will reduce the battery
usage time.)
%
PRE-CH: Enables you to return
to the previous channel you were
watching.
^
z
: Press to change
channels.
&
SOURCE: Press to display
and select the available video
sources.
*
FAV.CH: Press to switch to your
favorite channels.
(
MENU: Displays the main on-
screen menu.
)
RETURN: Returns to the
previous menu.
a
UP/DOWN/LEFT/
RIGHT/ENTER
E
: Use to
select on-screen menu items and
change menu values.
b
EXIT: Press to exit the menu.
c
P.SIZE: Picture size selection.
d
SRS: Selects SRS TruSurround
HD mode.
e
CC: Controls the caption
decoder.
f
MTS: Press to choose stereo,
mono or Separate Audio
Program (SAP broadcast).
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special uorescent light or neon sign nearby?
¦
¦
N
N
N
1
$
%
^
&
*
(
)
a
b
c
d
e
f
2
3
4
5
6
7
8
9
0
!
@
#
To Next Page
Loading...
Need help?
General
Weight and Dimensions
