SCH-N150 User Guide Draft Rev 1.2 3/16/01 12
Getting to know your phone
Antenna
A device for transmitting or receiving signals. The shape and size of the
antenna is determined, in part, by the frequency of the signals that they
receive. An antenna makes the call sound clearer when it is fully
extended. Use only in the normal position and do not touch the
antenna unnecessarily when the phone is active.
Backlight features
Your keypad has backlighting for easy visibility. For further information
on this feature see “ Backlight” on page 106.
C (Clear) key:
The clear key is used to erase numbers or characters have been
entered incorrectly, or it can be used to return to a previous screen in the menu.
.If an incorrect number or character has been entered on the display
screen, press the C key once briefly, to erase it.
.To erase all digits or characters from the display screen, press this key for one second.
.To back up one menu level, press once, briefly.
.To return to standby mode from any menu, press .
Display screen
The display has two areas, an upper line of stationary icons, and the
lower text and graphic area.
.The top line of icons shown on the LCD (liquid crystal display), are
displayed according to the phone’s operating mode. For further
information see “ Turning your phone on” on page 25.
.The lower area of the LCD displays the In -Use information, for example (if
available), the calling party’s name and number, the call timer, mute and
call waiting, as well as menus, sub menus etc.
End (power on/off key)
This key is utilized several ways:
.Press and hold [END] to turn on your phone.
.Press and hold [END] to turn off your phone.
.Press [END] once to disconnect a call or to return to standby mode and cancel your input.
Front flip
Closing your phone’s flip ends a call except when you are sending new messages from the Mail Kit.
There are several options that can be set when you open the phone’s flip:
.Answer an incoming call: To set this option, and for further information
see “ Answer mode” on page 129
.Voice dial an individual: To set this option, and for further information
see “ Play/Erase” on page 119.
.Control the backlight: To set this option, and for further information see
“ Backlight” on page 106.
Headset connector
This is where the optional headset is connected. The headset includes
an earpiece and microphone in a convenient, lightweight unit so you
can converse without using your hands.
.Before using, gently pry open the top of the cover to expose the headset
connector.
To Next Page
Loading...
Need help?
General
