SCH-N150 User Guide Draft Rev 1.2 3/16/01 51
To display your phone number:
1. Press [MENU] to display the menu.
2. Press [6 MNO] for the Display.
3. Press [4 GHI] for My Phone#. Your phone number will display.
4. Press [C] to return to standby mode.
To view your phone number during a conversation:
1. Press [MENU] to display the In-Use Menu.
2. Press [6 MNO] for My Phone #. Your phone number will display.
3. Press [C] to return to the previous menu.
Language
The Language option changes the language on the phone to English or Spanish.
To change languages:
1. Press [MENU] to display the menu.
2. Press [6 MNO] for Display.
3. Press [5 JKL] for Language.
4. Scroll between English or Spanish.
5. When the desired option is displayed, press [OK/Message] to save.
Set Time
Your phone is equipped with a standard clock. Although your phone will automatically
display date and time when in digital mode, this information will not be available on
the screen when your phone is out of service or in analog mode when powered up.
To set the clock manually:
1. Press [MENU] to display the menu.
2. Press [6 MNO] for Display.
3. Press [6 MNO] for Set Time.
4. Enter the desired date, and time in 12-hour display format.
Press [2 ABC] for ‘AM’ and [7 PQRS] for ‘PM’ at the end of time digit entry.
5. Press [OK/Message] to save the setting.
The entered date and time displays on the standby mode screen.
6. Or, p ress [C] to return to the previous menu.
Auto Hyphen
With the Auto Hyphen option set to on, your phone can automatically
hyphenate numbers. For example: 972-761-0000.
Here’s how it is configured:
1. Press [MENU] to display the menu.
2. Press [6 MNO] for Display.
3. Press [7 PQRS] for Auto Hyphen.
4. Select between ‘Yes’ and ‘No’ using the navigation key. Press [OK/Message] to save.
5. Pressing [C] returns you to the previous menu.
Version
The Version menu displays the current hardware/software version
that is installed in your phone. This feature is helpful if you need
to call customer care.
To view the version:
1. Press [MENU] to display the menu.
2. Press [6 MNO] for Display.
3. Press [8 TUV] to view the Version information.
4. Press [END] to quit and return to standby mode.
5. Or, p ress [C] to return to the previous screen.
To Next Page
Loading...
Need help?
General
