SCH-N150 User Guide Draft Rev 1.2 3/16/01 52
Voice Dial
Voice dialing
Your phone features voice dialing. Whether on a digital or an analog network, you can
call up to 10 stored names simply by speaking the name into the
microphone. Using the voice dialing option requires that you first
program the phone to recognize the name of the person you are calling.
Note: You cannot connect voice dialing entries to your phone book. If you wish to
Set voice dialing for frequently used numbers in your phone book, you need to
record names and re-enter the same phone numbers to the voice dial memory locations, separately.
Tips on recording names
− Avoid recording similar names phonetically. If you record a similar name
to one that is already stored in voice-dial memory, the phone requests another name.
− Avoid recording in a noisy place.
− Speak clearly and naturally.
− Avoid very long or very short names. Names with two to five syllables are recommended.
− If the voice dial entry does not connect properly, you may need to record
the name and number again.
Record
The phone provides voice prompts and screen displays to guide you
through the recording process.
To program the phone for voice dialing:
1. Press [MENU] to display the menu.
2. Press [7 PQRS] for Voice Dial.
3. Press [1 .-’] for Record. The phone prompts you to record a name.
4. Wait for a beep and then say the name. The phone stores the name and
then prompts you to speak the name again.
5. Respond to the prompt by repeating the name after the beep exactly as
you did the first time. If the name is accepted, the phone requests the
phone number.
6. Enter the phone number using the keypad.
7. To store the phone number, press [OK/Message]. The number you entered
displays, along with the notification ‘Recorded’. If the number you
entered matches a number already stored in your Phone Book,
then the name also displays, together with the notification ‘Recorded’.
8. The phone returns to previous Voice Dial menu.
Review
The Review option is used to review and/or erase dialing entries.
To play or erase voice dialing entries:
1. Press [MENU] to display the menu.
2. Press [7 PQRS] for Voice Dial.
3. Press [2 ABC] for Review. A list of stored voice dial numbers displays.
(The names also display if already stored in the Phone Book).
4. Press the digit key to select the desired entry or scroll to the desired entry
and press [OK/Message]. The recorded name is vocalized. You can quickly
scroll through entries using the navigation key without having to listen to
each one, or you can listen to them all as they play in order if you wait for
the voice prompt “Next entry”.
To Next Page
Loading...
Need help?
General
