SCH-N150 User Guide Draft Rev 1.2 3/16/01 44
− [+] addition
− [-] subtraction
− [x] multiplication
− [/] division
6. Press the digit keys to enter the second number of your calculation.
7. Press [OK/Message] to perform the calculation and see the result, or:
8. You can continue to perform calculations with the same operator or
change the operator and continue your calculations. Every time that you
change the operator, the previous calculation is performed and the result
is displayed as the top number in the display.
9. Press [OK/Message] to perform the calculation and view the result.
Alarm Set
Your phone can set one alarm clock.
The alarm can be set to go off once or daily at a programmed
time. Once you set an alarm, it is easy to change it’s time or to turn it off.
1. Press [MENU] to display the menu.
2. Press [4 GHI] for Scheduler.
3. Press [8 TUV] for Alarm Set.
4. Press the navigation key to scroll through the alarm options, ‘Once’ ‘Daily’, or ‘Off’.
Select the alarm option you want to set by pressing [OK/Message].
5. Press the digit keys to set the alarm time. Since your phone only supports 12-hour time display,
press [2 ABC] for AM and [7 PQRS] for PM at the end of each time entry .
6. Press [OK/Message] to save the setting and return to the standby mode. Or, press [C]
to return to the previous alarm options menu.
7. To change the alarm time or turn the alarm off, repeat steps 1. to 6. above.
4. Once the alarm is set, a graphic icon notifying you that the alarm is active will
always be displayed in standby mode.
To Next Page
Loading...
Need help?
General
