SCH-N150 User Guide Draft Rev 1.2 3/16/01 35
Dialing numbers from the phone book
Dialing numbers from your Phone Book is quick and easy. Different
methods are explained below:
Shortcuts to memory dialing
Speed Dialing: From standby mode, enter the number of the
memory location, and press [SEND].
Scrolling to the number: From standby mode, press the navigation key left to
access the Phone Book and select [1 .-’] or [3 DEF].
Scroll until the desired number is reached, then press [SEND] to dial.
Note: For the One-Touch & Two Touch dialing to work as described below, the
category setting in the phone book must be set to Speed Dial for the entry.
One-Touch Dialing: Memory locations 1 through 9 are special One-Touch
locations. You can dial the phone numbers stored in the Phone Book memory from 1
through 9 simply by pressing one key. For example, for location number 001. Press
and hold [1 .-’]. The name and number is displayed and dialed.
Two-Touch Dialing: Memory locations 10 through 89 are special Two-Touch locations.
For example, for location number 013, p ress [1 .-’] and then hold down [3 DEF].
The name and number are displayed and dialed.
To Next Page
Loading...
Need help?
General
