SCH-N150 User Guide Draft Rev 1.2 3/16/01 34
follows your hard pause. “SENDING DTMF” flashes on the screen (the
transmitted tones are audible).
Manual pause dialing
To perform manual pause dialing without first storing the number in
the Phone Book, enter pauses manually using the Digit Entry menu
during the dialing process.
To manually dial a number using a pause(s):
1. Enter the phone number of the service you want to call. For example,
your bank’s automated phone number might be an 800 number.
2. Press [MENU] to display digit dialing options.
− Scroll and press [OK/Message] for a Hard Pause (P pause). The screen displays a “ P”
indicating a hard pause. Enter the number to be sent after the pause by
pressing the digit keys, and then press [SEND]. After connecting, press [SEND]
again to transmit the additional number following the Hard Pause “P”.
− Scroll and press [OK/Message] for a 2 second Pause (T pause). The screen displays a “ T”
indicating a timed pause. The screen prompts for the number to be
sent after the pause. Enter the number to be sent after the pause by
pressing the digit keys, and then press [SEND]. The phone transmits the
number that follows the pause 2 seconds after connection.
Note: Storing numbers with pauses is convenient if you plan to dial the number often.
To access your phone book during a conversation:
1. Press [MENU] to display the In-Use Menu.
2. Press [3 DEF] for Phone Book.
3. Follow the procedures for “Find Name ” or “Find Entry” on page ??.
To Next Page
Loading...
Need help?
General
