101
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.
Connecting to a WLAN
1
Rotate the mode dial to B.
2
Select , , , or .
3
Press [m], and then select Wi-Fi Setting.
•
In some modes, press [m] or follow the on-screen
instructions until the Wi-Fi Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Wi-Fi Setting
Exit Manual
Refresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Icon/Option Description
Refresh
Refresh connectable APs.
Ad hoc AP
Secured AP
WPS AP
Signal strength
WPS button connection
Connect to a WPS AP.
Add wireless network
Add an AP manually.
•
Press [f] to open network setting options.
•
When you select a secured AP, a pop-up window appears. Enter
the required passwords to connect to the WLAN. For information
about entering text, refer to "Entering text". (p. 105)
•
When a login page appears, refer to "Using the login browser".
(p. 103)
•
When you select an unsecured AP, the camera will connect to the
WLAN.
•
If you select a WPS profile supported AP, select WPS PIN
connection, and then enter a PIN on the AP device. You can
also connect to a WPS profile supported AP by selecting WPS
button connection on the camera, and then pushing the WPS
button on the AP device.
To Next Page
Loading...
Need help?
General
