Shooting Functions
Use the Optical Image Stabilization (OIS) function to minimize camera
shake. OIS may not be available with some lenses.
Camera shake tends to occur in dark places or when shooting indoors.
In such cases, the camera uses slower shutter speeds in order to
increase the amount of light taken in, which can result in a blurry photo.
You can prevent this situation by using the OIS function.
If your lens has an OIS switch, you have to set the switch to ON to use
the OIS function.
To set OIS
options,
In Shooting mode, press [m]
→
K or k
→
OIS
→
an option.
Optical Image Stabilization (OIS)
OIS options
* Default
Icon Description
Mode 1*: The OIS function is applied only when you press
[Shutter] in full or halfway.
Mode 2: The OIS function is on.
Off: The OIS function is off. (This option may not be available
with some lenses.)
Without OIS correction With OIS correction
To Next Page
Loading...
Need help?
General
