22
· English
Monitoring options
Item Description
Default Camera Set the default camera to monitor in the camera list.
b
Delete Camera Delete the registered camera.
c
Cancel remembering
camera password
Cancel remembering the camera password.
Item Description
Full screen
Enlarges current video to the maximum size of the monitor.
` Supported by Internet Explorer only.
Night Vision
Set the IR lighting.
If you set the Night Vision to <OFF>, the camera will be operated only
in color mode.
Flip You can flip over the video image.
Capture Image Saves a picture of current live image you are viewing.
Network Speed
Select frame rate based on your network speed.
` If the bandwidth provided by the cable service provider is lower
than recommended, you may encounter a blurry image or a
temporary loss of video signal.
Sound
When enabled, you can hear what’s happening around the camera.
` Depending on the policy of the Internet service provider, the sound
output may not be supported. (in either UDP or Relay mode)
Brightness You can adjust the brightness of the screen image.
Audio
Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
If you set the microphone to '0', you will not hear the sound from the
live video and it is not recorded by the alarm of YouTube or Picasa.
Note that the Two-way audio transfer function is available only with the
smart phone application.
b c
To Next Page
Loading...
Need help?
General
