Tampering detection
You can set to detect tampering attempts and trigger events, such as sudden change
of camera’s framing direction, blocked lens and other overall change of scenes from the
video.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Tampering detection>.
3. Set whether or not to <Enable>.
4. Set the tampering detection sensitivity.
The higher the sensitivity, detects the
minutest tampering attempts.
5. Specify the <Activation time>.
• Always : To continuously check
whether or not an event has
occurred. If an event is detected, a
preset operation is executed.
`
If set to <Always>, the activation time
cannot be changed.
• Only scheduled time : To check whether or not an event has occurred, at a
specified time on a specified date. If an event is detected, a preset operation is
executed.
• [Clear (
)] : Reset all settings.
• Hour : Drag your mouse at Activation
Time and set the time by hours.
• Minute : Click an area in Activation
Time and set the time by minutes.
setup screen
120_ setup screen
To Next Page
Loading...
Need help?
General
