overview
24_ overview
AT A GLANCE (SNO-L6013R)
Appearance
Item Description
a
Micro SD Memory
Card Compartment
Compartment for the Micro SD memory card.
b
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
c
Sunshield It protects the camera from the direct sunlight.
d
Sunshield Hold It fixes the sunshield with the camera.
M
`
Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied
ethanol.
a b c
d
To Next Page
Loading...
Need help?
General
