English _51
● INSTALLATION & CONNECTION
Powering and networking
Connect the PoE device and camera’s PoE connectors.
J
`
Connect to a PoE (Power over Ethernet) enabled router’s PoE connector.
`
Use PoE that is compliant with the IEEE802.3af protocols.
`
If you want to connect an external device, you must turn off the external device before proceeding.
Network Cable Specification
Item Contents Remark
Connector RJ45
Ethernet 10/100Base-T 10/100 Mbps
Cable UTP Category 5e
Max Distance 100M
PoE Support IEEE 802.3af
To Next Page
Loading...
Need help?
General
