1 (not set) --/--/-- --:-- --:-- (not set)
2 (not set) --/--/-- --:-- --:-- (not set)
3 (not set) --/--/-- --:-- --:-- (not set)
4 (not set) --/--/-- --:-- --:-- (not set)
5 (not set) --/--/-- --:-- --:-- (not set)
6 (not set) --/--/-- --:-- --:-- (not set)
7 (not set) --/--/-- --:-- --:-- (not set)
8 (not set) --/--/-- --:-- --:-- (not set)
9 (not set) --/--/-- --:-- --:-- (not set)
10 (not set) --/--/-- --:-- --:-- (not set)
11 (not set) --/--/-- --:-- --:-- (not set)
12 (not set) --/--/-- --:-- --:-- (not set)
Edit/Add event
OK
Delete
R
Cancel
RET
Current events
Channel Date & time End
BBC ONE
17/07/03
10:52
OK
Save
RET
Cancel
Set event
Channel
Wake-up day
wake-up time
Finish time
Repeat
11:28
No repeat
Event #1 is due to start in 4
minutes. Press YELLOW to switch
now. GREEN to switch on time.
RED to delete the event .BLUE to cancel.
?
Delete
R
Due
G
Now
Y
Cancel
B
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time period has elapsed.
Press the MENU button to select main menu.
Press the
e
or
d
buttons to select Off timer. Press the OK button
to enter menu (Setting / Off timer).
Select your desired time by pressing the
7
or
8
button.
The time changes in 5 minute steps. The maximum time is 2:00hrs.
When Off timer has been set the time will show briefly on the screen
with the remaining time.
Press MENU button or RETURN button repeatedly to return to
normal TV picture.
✐ If the TV set is switched off by the Mains Switch 4 and by using
the Power button on the remote control, or during Autosort, the
timer settings will be cancelled.
■ Alarm timer
1. Press the MENU button. Select Off timer using the e or d button
press the 8 button to enter and select timer.
2. Select Alarm-Timer using the e or d button.
3. Press the 7 or 8 button to change time.
The time changes in 1 minute steps.The maximum time is 180 mins.
To cancel the alarm, press any button and the display will disappear.
✐ If the TV set is switched off by the standby button
4
on the
remote control or by the standby switch
4
on the top of the TV
set the timer settings will be cancelled.
● Scan for channels
1. Press the Menu button to select Main Menu.
2. Select Installation by using the
e
or
d
buttons. Press the OK
button to enter.
1. Select Manual or Auto scan by using the
e
or
d
buttons. Press
OK button to enter.
2. Using the
e
or
d
buttons, this screen will allow you quickly to
tune into any Channel multiplex emitted by the Transmitters in
your area.
3. Press the OK button to scan.
✐ Only those channels showing appreciable signal strength are suit-
able for viewing.
1. If Auto Scan is chosen, when completed, all channels are saved
automatically.
✐ Parental lock is still saved after the scan for channels has been
initialised.
Off Timer menu
To Next Page
Loading...
Need help?
General
