Sanyo CE32LDY1-B User Manual

15
■ DVD controls
With selected Sanyo DVD players you can use this remote. The fol-
lowing table shows all available function buttons for the DVD. When
you use a compatible Sanyo DVD player, first press and hold the
DVD button and then press your desired function button.
REMOTE CONTROL
REMOTE CONTROL
-
-
Analogue
Analogue
D/A selector
To switch between analogue (TV)
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Mute
Standby/Power on/off
To switch the TV on and off. Also see page 19.
and digital channels (DTV).
TV/AV switch
To switch from Digital TV, AV1, AV2, AV3, AV4
AV5 YPrPb, PC, HDMI or TV mode press
repeatedlyPress and hold, few seconds AV selection
bar appears. Select mode by using .
Screen mode selector
To select the screen mode, Auto, Natural,
Zoom14:9, Title In 14:9, Zoom 16:9,
Title In 16:9, Full or Normal.
Picture mode selector
To access a series of picture modes:
Personal, Dynamic, and Standard or Eco.
Volume up/down
To adjust the sound level.
OK
To save the setting in the menu,
or to call up the All channel table.
Bass selection
To get an emphasised bass sound, On or Off.
System selector
To select the colour system in the AV mode,
Auto, PAL, NTSC
Programme up and down
To select the next programme number or
previous programme number.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of analogue
programme position 10 - 99, for example 23,
first press -/-- button and press
2 and 3 numeric buttons.
MENU
To switch on the screen display menu on/off.
See page 8.
Cursors
To select the sub menu items in the
menu display, Up, Down, Left, Right.
Surround mode selector
To select the surround mode, Off, Mid, Max.
CS button
Press the button once to scan through all
current channels already tuned in. Press
again to cancel.
Nicam / Bilingual selector
To switch the sound mode as follows; NICAM or MONO
in the stereo programmes. A or B in the bilingual
programmes. If the nicam or stereo sound reception is
poor in quality, you can switch to MONO sound reception
by pressing A•B button. This operates only analogue
channel mode.
Teletext / TV selector
To switch TV, MIX and Teletext mode.
keys
Power
Play
Pause
Stop
Next chapter selection
Previous chapter selection
n/a
DVD command mode selection
DVD (blue symbols)
DVD
OK
Enter
Cursor selection

Sanyo CE32LDY1-B Specifications

General

Brand	Sanyo
Model	CE32LDY1-B
Category	TV
Language	English