EasyManuals Logo
Home>Sanyo>Projector>PLC-XF47

Sanyo PLC-XF47 User Manual

Sanyo PLC-XF47
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Picture Level and Pitch Adjustment
Installation
Picture tilt and projection angle can be adjusted with
handles on both sides of a projector. Projection angle
can be adjusted to 5.7 degrees upward.
1
2
3
LEVEL AND PITCH
ADJUST HANDLE
ADJUSTABLE
FEET
Height of front feet can be adjusted
by turning handles.
Press the knob on the handle. The handle pops
out.
Turn handles (right and left) until picture is
projected on proper position. Rotate rear
adjustable feet to stabilize the projector on a
table.
Press the knob and retract the handle.
REAR ADJUSTABLE
FEET. (Refer to p.10).
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen.(See page 27)
Lens Shift Adjustment
When the lens is shifted to top.
The display position can be
shifted upward up to 50%
elevation of the display.
When the lens is shifted to bottom.
The display position can be
shifted downward up to 50%
low level of the display.
When the lens is shifted to leftmost.
The display position can be
shifted to the left in up to
10% width of the display.
When the lens is shifted to rightmost.
The display position can be
shifted to the right in up to
10% width of the display.
Downloaded From projector-manual.com Sanyo Manuals

Table of Contents

Other manuals for Sanyo PLC-XF47

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XF47 and is the answer not in the manual?

Sanyo PLC-XF47 Specifications

General IconGeneral
Vertical scan range48 - 120 Hz
Horizontal scan range15 - 120 kHz
Projection technologyLCD
Contrast ratio (typical)2000:1
Screen size compatibility40 - 600 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical80 °
Keystone correction, horizontal40 °
I/O portsAnalog (D-sub15), Serial in & Serial out (D-Sub 9 x 2)
Video outUXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA, MAC
Resolution2359296 pixels
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)581 x 815.5 x 251.5 mm
Power requirements200-240 V AC 9.7 A Max, 50 / 60 Hz
Connectivity technologyWired
Lamp typeNSH
Lamp power330 W
Light source typeLamp
Dot clock scanning frequency230 MHz
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)1700 W
Weight and Dimensions IconWeight and Dimensions
Weight36500 g

Related product manuals