Sanyo PLC-XF47 User Manual

65
Menu Tree
Input
RGB (PC analog) Go to System
(1)
Input 1
Y, Pb/Cb,Pr/Cr
Computer Input/Video Input
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Network
RGB
Go to System
(1)
Go to System
(3)
Go to System
(2)
Video
S-video
Input 2
Go to System
(1)
Input
H-sync freq.
V-sync freq.
PIN code lock
Information
Key lock
Screen
Language
Lamp mode
Power management
Security
Remote control code
Quit
0–63
0–63
Off/On/Film
Image Adjust
Contrast
Brightness
Color ✽
Tint ✽
Red
Green
Blue
Sharpness
Reset
Store
Gamma
Progressive ✽
0–63
0–63
0–63
0–31
0–15
Image 1
Yes / No
Quit
Off/OnNoise reduction ✽
0–63
0–63
✔Note:
• The Menu display varies depending on the input signal.
Information Image Adjust
✽
Displayed only in Video Input
High
Mid
Low
XLow
Adj.
Color temp.
Appendix
Color
management
Auto picture
control
Off/L1/L2
High
Mid
Low
Color temp.
Offset Red/Green/Blue
Image 10
Color
Gamma
List
Color M.
Menu
Mid
Low
Color M.
All Del
Menu
Lamp control
Go to System
(2)
Downloaded From projector-manual.com Sanyo Manuals

Sanyo PLC-XF47 Specifications

General

Vertical scan range	48 - 120 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	40 - 600 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	80 °
Keystone correction, horizontal	40 °
I/O ports	Analog (D-sub15), Serial in & Serial out (D-Sub 9 x 2)
Video out	UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA, MAC
Resolution	2359296 pixels
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	581 x 815.5 x 251.5 mm
Power requirements	200-240 V AC 9.7 A Max, 50 / 60 Hz
Connectivity technology	Wired
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Dot clock scanning frequency	230 MHz
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)	1700 W

Weight and Dimensions

Weight	36500 g