Computer Input
33
When the D.ZOOM + (▲) is pressed, the On-Screen
Menu disappears and the message "D. zoom +"
is displayed. Press the D.ZOOM
▲ or the SELECT
button to expand the image size. And press the
Point
▲▼◄► buttons to pan the image. The Panning
function can work only when the image is larger than
the screen size.
Digital zoom +
When D.ZOOM – (▼) is pressed, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the D.ZOOM
▼ or the SELECT button to
compress image size.
To exit the Digital zoom +/– mode, press any button
except the D.ZOOM
▲▼ buttons, SELECT, and Point
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment or select an input
source
from the Input Source Selection (p.25) again, or
adjust the screen size with the D.ZOOM ▲▼ buttons.
Digital zoom –
For zooming in and out the images
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
Note:
• The panning function may not
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.
29)
• The minimum compression ratio
can be limited depending on the
input signal or when the Keystone
function is working.
•
True, Full, and Digital zoom +/–
cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.
26).
• Digital zoom +/- cannot be selected
when Full or True is selected.
To Next Page
Loading...
Need help?
General
