Video Input
36
Press the MENU button to display the On-Screen
Menu. Press the Point
◄► buttons to move the red
framed pointer to the AV System Menu icon.
Video System Selection
Press the Point ▲▼ buttons to move the red arrow
pointer to the system that you want to select and
then press the SELECT button.
1
2
If the projector cannot reproduce proper video image,
it is necessary to select a specific broadcast signal
format among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M, and PAL-N.
P
AL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image,
it is necessary to select a specific component video
s
ignal format among 480i, 575i, 480p, 575p, 720p,
1035i, and 1080i.
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
Auto
Auto
AV System Menu (Video or S-Video)
AV System Menu (Component)
Move the pointer to a
system and press the
SELECT button.
A
V System Menu icon
Selected system is
displayed.
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
To Next Page
Loading...
Need help?
General
