English 66
SIMPLE/SHOOTING
Using the flash
The flash is not only used for photographing under dark conditions, but is also
convenient for example when the subject is in shadow or lit from behind. The
flash is available only when shooting single-shot still images.
1 Display the SIMPLE Mode Recording Menu (page 38), select the
flash setting, and press the SET button.
h The screen to select the flash operation appears.
2 Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
3 Press the [ ] button to take the picture.
9: The camera detects the subject brightness and uses the flash only
when necessary.
:: The flash operates with every image captured regardless of the
conditions.
;: The flash does not operate even in dark situations.
Auto flash
Flash operates automatically
OK
To Next Page
Loading...
Need help?
General
