www.schaerer.com Operation
20/76
Operating instructions / V04/01.2012
► Dense milk foam is created by injecting steam on the bottom third of the milk height, rolling and turning
clockwise.
; The milk is heated from 37°C to 65°C.
► After steam dispensing is nished, remove the cup/container.
► Clean the outside of the steam wand with a moist paper towel.
► Point the steam wand at the drip grid and briey press the [ Steam ] button.
; This removes milk and beverage residues from the steam wand.
Supersteam / Finesteam
Available only for Schaerer Coffee Art Plus .
► Place the cup/container beneath the outlet.
; The tip of the steam wand must be completely under the surface of the milk.
► Press the [ Steam ] button.
► Wait for steam dispensing to nish (programmed temperature).
► After steam dispensing is nished, remove the cup/container.
► Clean the outside of the steam wand with a moist paper towel.
► Point the steam wand at the drip grid and briey press the [ Steam ] button.
; This removes milk and beverage residues from the steam wand.
Dispensing options
Stopping continuous dispensing
If a beverage is incorrectly selected, continuous dispensing can be stopped.
Stopping continuous dispensing (option)
► Press [
].
; Continuous dispensing is stopped.
Delete beverage in the pre-selection (option)
► Press [
].
; The pre-selected beverages are deleted.
; The current beverage is full dispensed.
Preselecting beverages
Provided that the machine has been appropriately congured, several different beverages can be selec-
ted one after another. The coffee machine dispenses the selected beverages in the order given.
Double beverage
If appropriately congured, two beverages can be dispensed simultaneously by pressing [ 2x ].
► Place the cups under the outlet.
► Move the outlet to the correct position.
► Press [ 2x ].
► Press the required beverage button.
► Remove the cups after the beverages have been dispensed.
Milk volume
Milk temperature in °C (Celsius)
0 °C 35 °C 65 °C
3 4
Select the product
Pre-selection 1