SCHUBERTH SC1 User Manual

SC1
11
English
4.4 Checking the Battery Level
4.4.1 LED Indicator
When the headset is powering on, the red LED ashes rapidly indicating
the battery level.
4 ashes = High, 70 ~ 100%
3 ashes = Medium, 30 ~ 70%
2 ashes = Low, 0 ~ 30%
4.4.2 Voice Prompt Indicator
When you power on the headset, keep pressing the (+) Button and the
(-) Button simultaneously for about 3 seconds until you hear three, high
toned beeps. Then you will hear a voice prompt indicating the battery
level. However, if you release the buttons as soon as the headset turns
on, you will not hear a voice prompt for the battery level indication.
4.5 Volume Adjustment
You can easily adjust the volume by tapping the (+) Button or the (-)
Button. You will hear a beep when the volume reaches the maximum or
minimum level. The volume is set and maintained independently at
dierent levels for each audio source even when you reboot the
headset. For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the volume for your
Bluetooth MP3 music. However, if you adjust the volume during stand-
by mode, it will aect volume levels of every audio source.

SCHUBERTH SC1 Specifications

General

Brand	SCHUBERTH
Model	SC1
Category	Automobile Accessories
Language	English