SC1
14
Note:
1.
If you have two audio (A2DP) devices connected to your headset then the
audio from one device will interrupt the audio from the other device. For
example, if you are playing music from the primary mobile phone, then it can
be interrupted by playing music from the secondary mobile phone and vice
versa.
2.
You have to use a motorcycle specic GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth. Most automotive GPS systems
do not have this feature.
3.
The Sena SR10 is a Bluetooth two-way radio adapter for group communication,
and uses Hands-Free Prole. The incoming audio from the two-way radio via
SR10 is heard in the background while having an intercom conversation or a
mobile phone call.
4.
The GPS navigation or a radar detector could be connected to the SR10 by
wire. The GPS voice instruction or the radar detector alarm is also heard in the
background via SR10 while having an intercom conversation or a phone call.
Please refer to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the SC1 for A2DP stereo music only or for mobile phone
handsfree only. These instructions are for advanced users who want to
pair the SC1 to their smartphones with only one selective prole: A2DP
for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SC1, you must clear
the previous pairing list on both devices: the mobile phone and the SC1.
To clear the pairing list on the SC1, please do a factory reset or following
the pairing list clearing procedure described in
section 14.1.10, “Factory
Reset”
or
14.1.7, “Delete All Bluetooth Pairing Information”
. To clear the
pairing list on the mobile phone, please refer to the mobile phone
manual. For most smartphones, delete the SC1 from the list of Bluetooth
devices in the settings menu.
To Next Page
Loading...
Need help?
General
