SC1
4
Safety Precautions
Please ensure that the product is properly used by observing the warnings and cautions
below to prevent any risk and/or damage to property.
Product Storage and Management
•
Keep the product free of dust. It may damage mechanical and electronic parts of the
product.
•
Do not store the product in high temperatures as this may reduce the life span of
electronic devices, damage the battery, and/or melt plastic parts of the product.
•
Do not store the product in cold temperatures. Abrupt changes in temperatures may
cause condensation and damage electronic circuits.
•
Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as
this may damage the product.
•
Do not paint the product. Paint may obstruct moving parts or interfere with the normal
operation of the product.
•
Do not drop or otherwise shock the product. It may damage the product or its internal
electronic circuits.
•
Do not disassemble, repair or modify the product as this may damage the product and
invalidate the product warranty.
•
Do not store the product in humid environments, especially for long time storage.
Product Use
•
In some regions, it is prohibited by law to ride motorcycles while wearing headsets or
earbuds. Therefore be certain to comply with all relevant laws in the region before using
the product.
•
The headset is for motorcycle helmets only. To install the headset, you must follow the
installation instructions shown in the User’s Guide.
•
Use of the product at a high volume for a long period of time may damage your eardrums
or hearing ability. Keep the volume at a modest level to prevent damage.
•
Do not cause impact to the product or touch it with sharp tools as this may damage the
product.
•
Do not use the product in high-temperatures or apply heat to the product as this may
cause damage, explosion, or re.
•
Keep product away from pets or small children. It may damage the product.
•
In any place where wireless communication is prohibited, such as hospitals or airplanes,
turn o the power and refrain from using the product. In a place where wireless
communication is prohibited, electromagnetic waves may cause hazards or accidents.
•
Do not use the product near hazardous explosives. When it is near any explosion hazards,
turn o the power and heed any regulations, instructions, and signs in the area.
•
When using the product, be certain to conform to laws regarding the use of
communications devices while riding.
•
Do not put the product where it may hamper the rider’s vision or manipulate it while
riding. This may cause trac accidents.
•
Before riding, fasten the product to the helmet, and double-check that it is fastened.
Separation of the product while riding may cause damage to the product or accidents.
•
If the product is damaged, stop using it immediately. It may cause damage, explosion, or
re.
To Next Page
Loading...
Need help?
General
