Segway x2 SE Service Manual

13–1
Segway Personal Transporter SE Service Manual
13 Motor
This chapter describes the removal and installation of a Motor assembly on a
Segway PT. There are two Motors on each Segway PT.
WARNING!
• Failure to follow these safety precautions could lead to electrical shock,
serious injury, death, or damage to property.
• Read all instructions.
• Power off the Segway PT.
• Unplug the Segway PT.
• Remove batteries before servicing.
• Wear safety glasses.
CAUTION!
• When a repair involves opening the console or chassis cover, best
practice electrostatic discharge (ESD) control procedures must be
followed. Failure to follow ESD procedures could result in personal
injury or damage to property.
When to Replace
It is appropriate to replace a Motor if any of the following symptoms are present:
• Motor is a source of noise.
• Motor is loose.
• Motor is cracked or damaged.
• The elastomer bushing is damaged.
Diagnostics determine whether the Motor is defective. For diagnostic
procedures, contact a Segway Service Representative.
Applies to Models
i2 SE, x2 SE, x2 SE Turf
Qualications
Certified Service Technician
Technician Replaceable Parts
Motor with Coupling (22252-00001)
1 Motor with Coupling
Drive Hub (21783-00004)
1 Drive Hub
Elastomer Bushing (21461-00001)
1 Elastomer Bushing

Segway x2 SE Specifications

General

Brand	Segway
Model	x2 SE
Category	Scooter
Language	English