SHANLING Q1 – ADVANCED USER MANUAL
Page 7
Warning: Lower volume of Q1 before switching to high gain, to avoid any damage to hearing
and equipment.
ReplayGain (FW V1.2)
Activate to eliminate volume differences between audio files. Supports both Audio Track and
Album modes.
Note: All files need to be tagged accordingly with gain information.
Digital filters
This setting affects data processing in build-in Digital to Analog converter. Change of filter will
result in small changes in final sound.
• Linear Fast - Linear Phase Fast roll-off filter
• Linear Slow - Linear Phase slow roll-off filter
• Minimum Fast - Minimum Phase Fast roll-off filter
• Minimum Slow - Minimum Phase Slow roll-off filter
• Apodizing Fast 1 – Apodizing Fast roll-off filter type 1
• Apodizing Fast 2 – Apodizing Fast roll-off filter type 2
• Corrected min. Fast – Corrected Minimum phase fast roll-off filter
• Brick Wall – Brick Wall filter
Note: Stock setting from factory is “Minimum Slow”.
Channel Balance
Setting of channel balance between left and right channel.
To set up, click “+” and “-“ symbols or drag finger over setting bar.
Play Mode
• List play – Q1 will play once all files from chosen album/folder/playlist and stops when
finished.
• Repeat Track – Q1 will play single chosen file in continuous loop.
• Shuffle – Q1 will play files from chosen album/ folder/playlist in random order. Files
will be played only once.
• Repeat All –Q1 will play all files from chosen album/folder/playlist in continuous loop.
Note: Play mode can be quickly changed on now playing screen, Playback controls 1
Folder Skip
Setting affecting file playback in Folders Submenu.
If enabled, and if Play Mode is set up to “Shuffle” or “List Play”, after last file from chosen
folder is played, Q1 will automatically follow up with file from following folder.
To Next Page
Loading...
Need help?
General