Shanling Q1 User Manual

SHANLING Q1 – ADVANCED USER MANUAL
Page 1
Basic controls
POWER ON/OFF
Press and hold the volume wheel for 3 seconds to power on Q1.
Press and hold the volume wheel for 3 seconds and then click “Yes” in confirmation window to
power off Q1.
SCREEN LOCK
Single press of the volume wheel will turn on/off screen of Q1.
If lock screen is activated, swipe right to unlock Q1.
Connected settings: Buttons lock / Lock screen / Double click wake up / Idle
ADJUSTING VOLUME
Playback volume is divided into 100 steps.
Turn the volume wheel to change volume. Turn up(clockwise) to increase volume, turn
down(counterclockwise) to decrease volume.
Volume bar is displayed in status bar while volume is being adjusted. Tap volume bar to access
volume setting and then drag volume slider to quickly adjust volume. Volume setting can be
accessed at any time by tapping clock in status bar.
Connected settings: Max Volume / Default volume / Gain
HARDWARE PLAYBACK CONTROLS
Three buttons on left side serve as playback control.
• Top button – single press to jump to beginning of currently playing file (if played more
than 10 seconds) or to previous file. Hold down for 5 seconds to start rewinding back in
currently playing file.
• Middle button - single press to pause/resume playback.
• Bottom button - single press to jump to next file. Hold down for 5 seconds to start moving
forward in currently playing file.

Shanling Q1 Specifications

General

Brand	Shanling
Model	Q1
Category	Watch
Language	English