9
Dimension: 140mm x 215mm
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press
POWER
on the TV set or on the Remote Control to turn
on the TV. The SELECT LANGUAGE mode will be displayed.
2 Press
CH (
8
)
or
(
9
)
to select “ENGLISH”, “ESPAÑOL (SPANISH)”
or “FRANCAIS (FRENCH)”.
3 Press
VOL (+)
or
(–)
to SET LANGUAGE and access EZ SETUP
mode.
4 Press
VOL (+)
.
The tuner will automatically search for the broadcast
and cable TV channels. (The CH No. will
automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
and it will be canceled.
If you want to SETUP again, please refer to page
26 on EZ SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 27 ~ 29
for more information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 27 ~ 29 for
more information on manually memorizing the channels using CHANNEL SETTING.
To Next Page
Loading...
Need help?
General
