3 – 3
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
Confirm the screws supplied with the TV.
Screws (
×
4)
(used in step 2)
2
Insert the stand base to the right and the left
of the bottom of the TV. ( )
3
Insert and tighten the 4 screws into the holes
on the bottom of the stand base. ( )
NOTE
• To detach the stand, perform the steps in reverse order.
• Do not attach or detach the stand without holding it. Doing
so can cause the stand to fall, resulting in serious personal
injuries as well as damage to the stand.
1
2
Obeng
Sekrup
Kain lembut
Dudukan
LC-24LE170I
To Next Page
Loading...
Need help?
General