14
Connecting to the Internet
CONNECTING TO THE INTERNET
When you fi rst power on your new SMART TV there will be an option to follow various on-screen set
up instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please
follow these simple steps below:
Connecting your TV: Wireless Connection
Enter the ‘Network’ menu and ensure that Wi-Fi is selected. Move to Wi-Fi and press [OK] on the
remote control. This will bring up any local Wi-Fi networks, choose the desired network and connect. If
a password is required a prompt and a keyboard to enter it will be displayed.
Connecting your TV: Ethernet/LAN cable
Plug your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Initial Document.indd Sec1:14Initial Document.indd Sec1:14 26/11/2018 13:01:2126/11/2018 13:01:21
To Next Page
Loading...
Need help?
General