1
5
OPERATION PANEL
Sort key and indicators
Use to select sort mode.
Exposure mode selector key and
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.28)
Light and dark keys and indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.28) Use to
start and terminate user program
setting. (p.63)
Alarm indicators
Developer replacement required
indicator (p.86)
Misfeed indicator (p.80)
Toner cartridge replacement
required indicator (p.66)
Maintenance indicator (p.86)
SPF indicator*
1
(p.27)
SPF misfeed indicator*
1
(p.84)
Copy ratio selector key*
3
and
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.30)
Copy ratio display (%) key/
READ-END key
• Use to verify a zoom setting without
changing the zoom ratio. (p.30)
• Use to check the number of originals
that must be returned to the document
feeder tray if a misfeed occurs in the
machine when the SPF is used. (p.85)
• Use to terminate reading originals in
sort mode.
(
p.31
)
Display
Displays the specified copy quantity,
zoom copy ratio, user program code
and error code.
SCAN key and indicator
(p.6, p.50)
ID CARD key and indicator
Use to copy ID card. For description,
see "ID CARD COPY" (p.34).
Start key and indicator
• Copying is possible when the
indicator is on.
• Press to start copying
• Use to set a user program. (p.63)
Power save indicator
Lights up when the unit is in a power
save mode. (p.61, p.63)
Tray select key
Use to select a paper feed station
(paper tray 1, paper tray 2*
2
or multi-
bypass tray). (p.30)
Paper feed location indicators
Light up to show the selected paper
feed station.
*1 Only operates when an SPF is
installed.
*2 Peripheral device
*3 The indicators of the operation panel
may differ depending on the country
and region.
To Next Page
Loading...
Need help?
General
