Sharp MX-B200 User Manual

1
7
POWER ON
Turn the power switch on the left side of the unit to the "ON" position. The start ( )
indicator will light up and other indicators which show the initial settings of the
operation panel will also light up to indicate the ready condition. For the initial
settings, see "Initial settings of operation panel" (p.8).
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start ( ) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.
• The unit will enter a power save mode once the set time has elapsed
without any unit operation. The settings of the power save modes can
be modified. See "USER PROGRAMS" (p.63).
• The unit will return to the initial settings a preset amount of time after
the end of a job. The preset amount of time (auto clear time) can be
changed. See "USER PROGRAMS" (p.63).

Sharp MX-B200 Specifications

General

Brand	Sharp
Model	MX-B200
Category	All in One Printer
Language	English