1
6
INDICATORS ON THE OPERATION PANEL
The start ( ) indicator indicates the state of the printer or scanner.
Start indicator
On: Indicates the unit is ready for copying or scanning is being performed.
Blinking: The indicator blinks in the following situations:
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy or print job.
Off: The indicator is off in the following situations:
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• During print online.
Power save indicator
On: Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side cover is opened and
closed or the power turned off and on).
SCAN indicator
On: The SCAN ( ) key has been pressed and the unit is in scanner mode.
Blinking: A scan job is being executed from the computer, or scan data is stored
in the unit's memory.
Off: The unit is in the copy mode.
ZOOM keys and indicator
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (When the
SPF is being used, the zoom copy ratio
range is 50% to 200%.) (p.30)
Copy quantity keys
• Use to select the desired copy
quantity (1 to 99). (p.28)
• Use to make user program entries.
(p.63)
Clear key
• Press to clear the display, or press
during a copy run to terminate
copying. (p.28)
• Press and hold down during standby
to display the total number of copies
made to date. (p.64)
To Next Page
Loading...
Need help?
General
