Chapter 2
LOADING PAPER
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not closed or is improperly closed.
PAPER
For best results, use only SHARP recommended paper.
*
1
The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
*
2
Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*
3
When using paper heavier than 104 g/m
2
, use paper that is A4 or smaller.
Paper tray
type
Paper type Size Weight Capacity
Paper tray Standard paper
Recycled paper
A5, B5, A4 56 g/m
2
to
80 gm
2
250 sheets *
1
(The paper
should not
exceed the
line on the
tray)
Bypass tray Standard paper
Recycled paper
A6 to A4 56 g/m
2
to
80 gm
2
50 sheets *
1
Thick paper 106 g/m
2
to
128 g/m
2
*
3
Load one
sheet at a
time in the
bypass tray.
Transparency
film/Labels
Envelopes *
2
Monarch
Commercial 9
Commercial 10
DL
C5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
