22
REDUCTION/ENLARGEMENT/ZOOM
Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is
being used, the zoom copy ratio range is 50% to 200%.) The [ZOOM] key can be
pressed to quickly select a ratio from among eight preset ratios. In addition, the [ ]
key ( ) and [ ] key ( ) can be pressed to select the ratio in increments of 1%.
1
Check the original and paper size, and place the original(s).
2
Press the [ZOOM] key.
3
Press the [ZOOM] key and/or [ ] key ( ) or [ ] key ( ) to
select the desired copy ratio and then press the [OK] key.
Selecting a preset ratio
The preset ratios change as follows each time the
[ZOOM] key is pressed:
"100%" → "86%" → "70%" → "50%" → "25%" →
"400%" → "200%" → "141%"
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in
increments of 1%.
Use the [ ] key ( ) or the [ ] key ( ) for
fine adjustment.
4
Select the number of copies and any other copy settings, and
then press the [START] key ( ).
The copy will be delivered to the paper output tray.
• To return the ratio to 100%, press the [ZOOM] key until 100%
appears.
• Press the [ZOOM] key to set the approximate ratio, then press the
[ ] key ( ) or [ ] key ( ).
• To decrease or increase the zoom ratio rapidly, hold down the [ ]
key ( ) or [ ] key ( ).
The ratio will stop changing at each of the preset ratios. To continue
changing the ratio, release the key and then hold it down again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
