47
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been
loaded in the machine.
1
Start WordPad and open the document that you wish to print.
2
Select "Print" from the application's "File"
menu.
If you are using Windows 7, click the button.
3
Make sure that "SHARP MX-xxxx" is selected as the printer.
If you need to change any print
settings, click the "Preferences"
button to open the printer driver
setup screen.
Windows 2000 does not have the "Preferences" button in this dialog box.
Select settings as needed on each of the tabs in the setup screen and click
the "OK" button.
"PRINTER DRIVER SETTING SCREEN" (p.49)
"SETTING ADVANCED PRINT FUNCTIONS" (p.50)
4
Click the "Print" button.
Printing begins. When printing begins, the Print Status Window
automatically opens.
"OUTLINE OF THE PRINT STATUS WINDOW" (p.59)
The print job will be delivered to the output tray.
Canceling a print job
• To cancel the print job, press the clear key or clear all key and then press OK key.
The menu used to execute printing
may vary depending on the software
application.
The button that is used to open the printer driver properties window
(usually "Properties" or "Printing Preferences") may vary depending on
the software application.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
