Sharp SHV40 User Manual

Turning the Power On/Off
Turning the Power On
1
f
(hold down for at least 3 seconds) while the product
is turned off.
◎ The initial setting of the touch panel will be executed until “AQUOS”
disappears from the screen after the power is turned on. Do not touch the
screen, otherwise touch panel operations may not be performed properly.
◎ When you turn the power on for the first time after purchasing the product,
the initial setting screen is displayed automatically. For details on the initial
setting, refer to “Setting Guide” available on the au homepage.
Turning the Power Off
1
f
(hold down for at least 2 seconds).
2
[Power off].
■ Restarting the Product
You can restart the product after turning it off.
1
f
(hold down for at least 2 seconds).
2
[Restart].
■ Turning the Power Off Forcibly
You can force the product to turn off if the screen freezes or you are unable to
turn the product off.
1
f
(hold down for at least 8 seconds).
Release your finger after the product vibrates to turn the power off.
◎ If the power is turned off forcibly, unsaved data will be deleted. Do not
turn the power off forcibly unless you cannot operate the product.
■ Booting in Safe Mode
Turn the product off then boot it in a state close to that at time of purchase.
If operation of the product is unstable, it may be due to applications installed
after purchasing the product. If symptoms improve when booted in safe mode,
uninstalling the applications you installed may remedy symptoms.
1
f
(hold down for at least 2 seconds).
2
Long touch “Power off” → [OK].
“Safe mode” is displayed at the bottom of the screen.
To end safe mode, restart the product.
◎ When the product is turned off, you can boot it in safe mode by
f
(hold
down for at least 3 seconds) to turn it on, and then holding down
d
until the lock screen is displayed after the SHARP logo appears.
◎ It is recommended that you back up your data on the product before
booting in safe mode.
◎ Widgets that you yourself created may be deleted.
◎ Safe mode is not a normal state for the product to be booted in. End safe
mode before normal use.
Turning the Screen On/Off
If you press
f
or no operation is made for a specified time, the screen is
turned off.
■ Turning the Screen On
1
f
while the screen is turned off.
◎ When you put the product in your pocket, bag, etc., turn the screen off.
Not doing so may cause inadvertent operations.
11

Sharp SHV40 Specifications

General

Brand	Sharp
Model	SHV40
Category	Cell Phone
Language	English