SICK LMS100 User Manual

Operating Instructions
LMS1xx Laser Measurement Sensors
For your safety
8012471/ZN27/2017-06-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 15
Chapter 2
2.7.2 Electrical installation work
 Only authorized specialists are allowed to perform the skilled electrical installation
work.
 Only make and disconnect electrical connections when the device is electrically
isolated.
 Select and implement wire cross-sections and their correct fuse protection as per the
applicable standards.
 Do not open the housing.
 Observe the current safety regulations when working on electrical systems.
2.8 Quick stop and Quick restart
2.8.1 Switching off the LMS1xx
LMS10x/LMS12x/LMS17x:
 Switch off voltage supply (power supply unit)
LMS11x/LMS13x/LMS14x/LMS15x/LMS18x as well as LMC12x/LMC13x:
 Switch off voltage supply (supply unit) or disconnect the M12 supply cable on the
device.
The LMS1xx retains configurations parameters stored in the internal, non-volatile memory.
Measured values on the data interface are lost.
2.8.2 Switching back on the LMS1xx
LMS10x/LMS12x/LMS17x:
 Switch on voltage supply (power supply unit)
LMS11x/LMS13x/LMS14x/LMS15x/LMS18x as well as LMC12x/LMC13x:
 Switch on voltage supply (supply unit) or re-connect the M12 supply cable on the device.
The LMS1xx re-commences operation with the configurations parameters last saved.

SICK LMS100 Specifications

General

Brand	SICK
Model	LMS100
Category	Accessories
Language	English