Technical Information Chapter 3
TiM55x/56x/57x
Mounting
8015883/YZK8/2016-07-07 © SICK AG · Germany · All rights reserved · Subject to change without notice 11
3.2 Optional accessories
3.2.1 Install mounting set 2 (part no. 2068398) on the TiM5xx
The hanger-shaped mounting set 2 is used as skirting protection and as a bracket for mak-
ing fine adjustments on the scan plane. The TiM5xx can also be fastened directly onto the
bracket without the adapter plate (skirting protection only).
Mounting bracket
Hole for mounting the weatherproof housing, 3 x
Holes for mounting the spacer (for mounting weatherproof housing), 3 x
Hole for horizontal or vertical mounting of the mounting bracket on a base, 2 x 2
M4 x 16 cylinder head screw (hexagon socket) and compression spring for aligning the
TiM5xx, 3 x
Stud for locking the adapter plate after alignment, 2 x
Adapter plate
M3 x 8 cylinder head screw in 3.2 mm hole for mounting the TiM5xx on the adapter
plate, 2 x
Hole for mounting the TiM5xx directly on the mounting bracket, 2 x (alternatively,
without the option of adjusting the scan level)
To Next Page
Loading...
Need help?
General
