SICK TiM55 Series Mounting And Installation

Technical Information Chapter 3
TiM55x/56x/57x
Mounting
8015883/YZK8/2016-07-07 © SICK AG · Germany · All rights reserved · Subject to change without notice 9
3 Mounting
3.1 Notes on mounting
 The TiM5xx can, depending on the application purpose, be mounted in any position.
 Install the TiM5xx so it as unaffected by shocks and vibrations as possible.
 Install the TiM5xx so it is not exposed to any direct sunlight (window, skylight) or any
other heat sources. This prevents impermissible temperature increases inside the
device.
 During installation make sure there is no light or reflective surface behind the reference
target (see Figure ).
Using several TiM5xx
The TiM5xx is designed so that mutual interference of the same types of sensors is very un-
likely. To preclude even the slightest of influences on the measuring accuracy, we recom-
mend installing the TiM5xx as in the examples below.
225°
‒45°
180°0°
30°
90°
1
Crosswise placement of two TiM5xx
Placement of two TiM5xx opposed to each other

SICK TiM55 Series Specifications

General

Brand	SICK
Model	TiM55 Series
Category	Accessories
Language	English